NEC ELECTRA ELITE IPK II, Руководство по функциям и спецификациям

Страница: 520 / 996

Document Revision 1 Electra Elite IPK II
2 - 498 IPK II In-Mail
15-02-26 Multi-Line Telephone Basic Data Setup, MSG Key Operation Mode
Determine whether an extension’s MSG key should function as a Message key (0) or Voice Mail
key (1) (Default = 0). If set as a Message key, the user will be able to press the key to call the
voice mail only when they have new messages. If set as a Voice Mail key, it will function as a
normal Voice Mail key (it will not be active if Centralized Voice Mail is used).
15-03-01 Single Line Telephone Basic Data Setup - SLT Signaling Type
For each Electra Elite IPK II voice mail extension, this option must be set to “0”.
15-03-03 Single Line Telephone Basic Data Setup - Terminal Type
Set all SLIU ports used for Voice Mail as type 1.
15-03-09 Single Line Telephone Basic Data Setup - Caller ID Function for External Module
This option must be set to ‘0’ when voice mail is used or the integration code for the disconnect
function will be incorrect.
15-07-01 Programmable Function Keys
Assign a Voice Mail key to an extension. You must enter the Voice Mail key code (code 77)
followed by:
H
Your own extension number if you are setting up your own Voice Mail key.
H
A virtual extension number if you are setting up a Message Center key for a virtual extension.
H
A co-worker’s extension number if you are setting up a Message Center key for an installed
extension.
H
An uninstalled extension’s number if you are setting up a Message Center key for an uninstalled
extension.
(Optional) Assign a Voice Mail Record key to an extension (code 78).
(Optional) Assign a Personal Answering Machine Emulation key (code 16).
(Optional) Use a Call Redirect key (49) to allow a user to transfer a call to another extension or
voice mail without answering the call.
16-01-08 Department Group Basic Data Setup - Queuing for Department Group Call
To have Department Group calls queue when busy, set this entry to “1” for an extension or voice
mail group. For no queuing, enter “0”.
16-02-01 Department Group Assignment for Extensions
Put all the Voice Mail extensions in a unique Department Group (do not use Department Group
1). No other extensions should be in this group. This allows DILs to Voice Mail to ring other Voice
Mail extensions when the DIL’s assigned port is busy. Only one Voice Mail group is allowed per
system. Be sure to set up the Department Group in order. (For example, the first extension
should be order 1, the second order 2, etc.)
20-02-09 System Options for Multi-Line Telephones - Disconnect Supervision
Enable (1) disconnect supervision for the system.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to the voice mail extensions. It is recommended to use COS 14
for all time modes.