NEC E328, Руководство пользователя

Страница: 7 / 90

English - 4
ARNINN
9
Prevent tipping and falling for earthquakes or other shocks.
To prevent personal injury or damage to the product caused by tipping over due to
earthquakes or other shocks, make sure to install the product in a stable location and
take measures to prevent falling.
The measures to prevent falling and tipping are intended for reducing the risk of injury,
but may not guarantee the effectiveness against all earthquakes.
The product may tip causing personal injury.
• When using the product with the optional table top stand, fasten the product to a wall
using a cord or chain that can support the weight of the product in order to prevent
the product from falling.
Depending on the table top stand, the stand has the structure for preventing tipping.
Please refer to the table top stand manual.
• Use commercially-available clamps and screws (M6) to secure it to the product.
• Be sure to remove the cord or chain from the wall before moving the product to
prevent personal injury or damage to the product.
The product may fall causing personal injury.
• Do not attempt to hang the product using an installation safety wire.
• Please install the product in an area on the wall or ceiling strong enough to support
the weight of the product.
• Prepare the product using mounting accessories, such as hook, eyebolt, or mounting
parts, and then secure the product with a safety wire. The safety wire must not be
tight.
• Please make sure the mounting accessories are strong enough to support the
product weight and size before installing it.
Stability Hazard.
The product may fall, causing serious personal injury or death. To prevent injury, this
product must be securely attached to the floor/wall in accordance with the installation
instructions.
Many injuries, particularly to children, can be avoided by taking simple precautions such
as:
• ALWAYS use stands or installation methods recommended by the manufacturer of
the product set.
• ALWAYS use furniture that can safely support the product.
• ALWAYS ensure the product is not overhanging the edge of the supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture to reach the
product or its controls.
• ALWAYS route cords and cables connected to your product so they cannot be tripped
over, pulled or grabbed.
• NEVER place a product in an unstable location.
• NEVER place the product on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the product to a suitable support.
• NEVER place the product on cloth or other materials that may be located between
the product and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys and remote
controls, on the top of the product or furniture on which the product is placed.
If the existing product is going to be retained and relocated, the same considerations as
above should be applied.