NEC E328, Руководство пользователя

Страница: 6 / 90

English - 3
ARNINN
4
Handle the power cord with care. Damaging the cord could lead to fire or electric shock.
• Do not place heavy objects on the cord.
• Do not place the cord under the product.
• Do not cover the cord with a rug, etc.
• Do not scratch or modify the cord.
• Do not bend, twist or pull the cord with excessive force.
• Do not apply heat to the cord.
Should the cord be damaged (exposed core wires, broken wires, etc.), ask your dealer
to replace it.
5
Do not touch the power plug if you hear thunder. Doing so could result in electric shock.
6
Please use the power cord provided with this product in accordance with the power
cord table.
If a power cord is not supplied with this product, please contact NEC. For all other
cases, please use the power cord with the plug style that matches the power socket
where the product is located. The compatible power cord corresponds to the AC voltage
of the power outlet and has been approved by, and complies with, the safety standards
in the country of purchase.
7
For proper installation it is strongly recommended to use a trained service person.
Failure to follow the standard installation procedures could result in damage to the
product or injury to the user or installer.
8
Please install the product in accordance with the following information.
This product cannot be used or installed without the table top stand or other mounting
accessory for support.
• When installing the optional table top stand, lay this product down on a mat, a
blanket, or another soft material so that the panel is facing downward.
When transporting, moving, or installing the product, please use as many people (two
or more people for the E328/E438/E498/E558 and four or more people for the E658) as
necessary to be able to lift the product without causing personal injury or damage to the
product.
Please refer to the instructions included with the optional mounting equipment for
detailed information about attaching or removing.
Do not cover the vent on the product. Improper installation of the product may result in
damage to the product, an electric shock or fire.
Do not install the product in the locations below:
• Poorly ventilated spaces.
• Near a radiator, other heat sources, or in direct sunshine.
• Continual vibration areas.
• Humid, dusty, steamy, or oily areas.
• Outdoors.
• High-temperature environment where humidity changes rapidly and condensation is
likely to occur.
• A ceiling or wall that is not strong enough to support the product and mounting
accessories.
Do not mount the product upside down.