NEC E120e-M, Руководство пользователя

Страница: 109 / 119

2. System BIOS Setup
Express5800/E120e-M User's Guide
109
Chapter 3 Setup
2.4
Cases that Require Configuration
Only if a case applies to any of following cases, use the SETUP utility to change a parameter which was
configured as factory setting. A list of SETUP parameters and factory settings are described in Chapter 2 (1.
System BIOS) in " Maintenance Guide ".
Category Description To be changed Remark
Basic Change date and time
Main
→
System Date
Main
→
System Time
Configurable on OS
Enable NumLock at power-on
Boot
→
Bootup Numlock State
→
On
Hide the logo during POST
Boot
→
Quite Boot
→
Disabled By pressing the <Esc> key,
prevent the display of the
logo.
Memory Add or change DIMM
Advanced
→
Memory Configuration
→
Memory Retest → Yes
After rebooting, Memory
Retest changes No
automatically.
Optional
board
Disable Option ROM Scan of
installed option board
Advanced
→
PCI Configuration
→
PCI
Device Controller and Option ROM
Settings
→
PCIXX Slot Option ROM
→
Enabled
XX is PCI slot number of the
option board
Boot Change the boot order of
devices
Boot
→
Boot Option Priorities
→
Change the boot priority
When you use
EXPRESSBUILDER, set
CD/DVD to the highest
priority.
Use remote power on function
(via modem)
Advanced → Advanced Chipset
Configuration → Wake On Ring →
Enabled
Use remote power on function
(via RTC alarm)
Advanced
→
Advanced Chipset
Configuration → Wake On RTC Alarm
→
Enabled
Use console redirection
feature
Advanced
→
Serial Port Configuration
→
Console Redirection Setting
→
Change respective setting.
Security Set a password
Security
→
Administrator Password
→
Enter a password
Security
→
User Password
→ Enter a
password
If password is set, a
message to enter password
is displayed at next time
SETUP is launched.
Restrict bootup by entering
password
Security
→
Password on Boot
→
Enabled
Can be selected when
password is set.
UPS
Powerlink
When the server is supplied
with power from UPS, always
turn on the power.
Server
→
Power Control Configuration
→
AC-LINK
→
Power On
If it is turned off by using
POWER switch, leave it OFF
even when UPS supplies
power.
Server → Power Control
Configuration → AC-LINK → Last State
Keep the power OFF even
when UPS supplies power.
Server
→
Power Control Configuration
→ AC-LINK → Stay off