24
•
The calling party’s number along with the name and caller ID picture may be displayed if the caller’s
information is already stored in the phonebook.
If the caller has withheld his/her caller ID, the message
“Restricted”
is displayed to show that the number is being
withheld. If the network service provider cannot identify the number, the message
“Unknown”
is displayed to show
that number is not known.
Accepting a call
•
Press
key.
Rejecting a call
•
Press
key
or
Right Softkey
or close the flap of your phone. The call will be transferred to the voice
mailbox automatically.
You can also choose to put your calls on hold or to activate Call waiting or Call diversion. These options are
dependent on your network and subscription plans with your local mobile service provider.
If a call is received but not answered, the screen will display the caller’s telephone number (and the name if it was
previously saved in the phonebook). This information is stored in
Missed calls
.
Information of received and answered calls are stored in
Received calls
.
Insert the handsfree to the earphone jack at the side of the phone. When there is an incoming call:
•
Under auto answering mode, the call will be connected automatically.
•
Under manual answering mode, press send key to connect the call.
You can place a received or dialed call on hold by pressing
Right Softkey
. Press
Right Softkey
again to return to
the call.
If a call is received but not answered, the caller’s information is stored in
Missed calls
.
To return to a missed call:
Press
key to return to the standby screen. Select
Phonebook
>
Call options
>
Missed calls
from the main
menu.
Using handsfree
Placing a call on hold
You can set your phone to
answer a call by pressing any
key except
key. See
“Answer options” on page 29.
If you are making a call, the
phone gives priority to
receiving a call unless you
have already pressed
key.
Calling line identification is
subscription dependent. If
you have subscribed to the
service and the caller has
allowed his number to be
transmitted over the
network, the number of the
caller or the corresponding
name will be displayed on
the handphone screen.
Alternatively, press
key
from the standby screen to
access the
Dialed calls
list
and press navigation key
to display
Missed calls
.