background image

E-3

 WARNING

Do not use with any power voltage
other than the indicated voltage.

The equipment is designed to operate on a power
supply of 100-120 or 200-240 V 50/60 Hz AC. En-
sure that your power supply fits this requirement be-
fore attempting to use the equipment.

Handle power cord with care.

Handle the power cord carefully.
Damaged cord may cause fire or electric shocks.

• Use only the supplied power cord.
• Do not place any heavy object on the power cord.
• Do not lead the power cord under the equipment

body.

• Do not cover the power cord with a carpet or like

object.

• Do not damage or transform the power cord.
• Do not forcibly bend, twist or pull at the power

cord.

• Do not heat the power cord.
When the power cord is damaged (exposed core,
disconnection, etc.), contact your dealer for replace-
ment.

Disconnect power plug in case of
trouble.

When the equipment is developing smoke, smell or
noise or when the equipment has been dropped ac-
cidentally or the cabinet damaged, turn off the power
to the equipment first and then disconnect the power
plug from the outlet. Fire or electric shocks may oc-
cur if you continue to use it. Please contact your
dealer for repair.

Do not place equipment where it can
get wet.

Do not use the equipment in places where it can get
wet with water (see examples below). Also, never
place a vessel containing water above this equip-
ment. Otherwise fire or electric shocks may occur.

• Do not use this equipment in the rain or snow or

on the shore of an ocean, lake or river.

• Do not use this equipment in the bathroom or

shower room.

• Do not place a vase or flowerpot above this equip-

ment.

• Do not place glasses, cosmetics or chemicals

above this equipment.

Should water or other foreign matter have entered
the equipment, turn off the power to the equipment
first and then disconnect the power plug from the
outlet. Also, contact your dealer immediately for in-
structions.

Do not use equipment in places as
follows.

Do not use the equipment in places as follows. Oth-
erwise fire or electric shocks may occur.

• On a shaky table or in an inclined or unstable po-

sition

• Near a heater or in exposure to vibration
• In exposure to moisture or dust
• In exposure to oil mist or steam
• Near a kitchen table or humidifier

Do not allow any foreign matter to
enter equipment.

Do not attempt to insert or drop foreign objects, such
as metal or inflammable objects into the equipment.
Otherwise fire or electric shocks may occur. Take spe-
cial care when this equipment is used in places where
there are children.
Should any foreign matter have entered the equip-
ment, turn off the power to the equipment first and
then disconnect the power plug from the outlet. Also,
contact your dealer immediately for instructions.

Never open the cabinet.

Do not remove or open the cabinet of the equipment.
Also, never remodel the cabinet. Otherwise fire or
electric shocks may occur.
Please contact your dealer for checks, adjustments
or repairs of the equipment inside.

Do not cover the camera head.

Do not cover the camera head with a cloth or other
object. Heating can cause fire.

Do not touch power plug when you
hear thunders.

Do not touch the power plug when you hear thun-
ders.
Otherwise electric shocks may occur.

Содержание DV11G























Отзывы: