E-14
Setting the Camera Arm
As illustrated, raise the camera arm gently in the indicated direction while holding the
body down with your hand.
When the angle between the stage and the camera arm is 60 degrees, there is a click with
which the camera arm gets fixed momentarily. Normally use the equipment in this 60-
degree position. Though the camera arm may be raised to a position of 80 degrees, do
not attempt to raise it any further.
CAUTION
Be sure to hold the body down with your hand when raising
the camera arm.
Otherwise, the body may lift up to cause injury.
Turning Power On
Set the power switch on the back panel to ON ( ).
All the indicators on the control panel light up for about ten seconds.
Shooting the Material (Data)
q
Place your material on the stage.
w
Turn on the main light or turn on the base light, depend-
ing on the lighting in the room or the condition of the
material to be shot.
e
Determine the size for the zoom shooting.
r
Adjust the focus.
NOTE:
• For shooting a material with many characters, turn on the text mode, which will show the characters clearly for easier
reading.
How to Use
POWER
SWITCH
LIGHT
WHITE BALANCE
AUTO
POSI/NEGA
BLUE
RED
COLOR/BW
TEXT/PHOTO
MEMORY
DOWN
UP
CAMERA
MEMORY
EXTERNAL
SOURCE
CAPTURE
RNAL
AUTO
BRIGHTNESS
DARK
BRIGHT
FOCUS
AUTO
NEAR
FAR
ON/OFF
KEYSTONE
REAL/FREEZE
ZOOM
WIDE
TELE
w
e
r
60 degrees
(normal position)
