NEC Aspire, Руководство пользователя, Страница: 52 / 262

Section 2: Components
44 Product Description
Aspire Optional Feature Equipment
Aspire Wireless (DECT)
Aspire Wireless (DECT) Base Station —
P/N 780136
The Base Station, also known as the Radio Fixed Part (RFP), provides
the link from the Aspire Wireless phone to the Aspire system. The Base
Station is connected to the DSIU PCB using standard two wire (twisted
pair) telephone cable, CAT 4 or CAT 5. No local power is required for
the Base Station as it receives it power from the Aspire system. Each
Base Station supports 4 simultaneous Aspire Wireless traf
Þ c channels at
32 Kbit/s.
Aspire Wireless (DECT) Repeater — P/N 780138
The Repeater, also known as the Wireless Radio Fixed Part (WRFP),
provides extended coverage for low traf
Þ c areas not covered by a Base
Station. Suf Þ cient coverage for the main areas should be provided by the
Base Stations. An external antenna can also be connected which extends
the coverage area (maximum distance 3280’). Local power is required
for the Repeater and it must be synchronized with a Base Station in the
zone in which it will be providing coverage. Each Repeater can support 2
simultaneous Aspire Wireless traf
Þ c channels at 32 Kbit/s. As the
Repeater is paired with the Base Station, these are not additional chan-
nels, but are available to handle calls from the Base Station as the user moves out the range from the
Base Station to the Repeater’s area. The Repeater looks similar to the Base Station except that the
modular jack on the back is used for connecting the local power source and there is a small plastic
punch-out which provides the external antenna connection.
Aspire Wireless (DECT) External Antenna — P/N 780145
The external antenna is connected to the antenna connection on the back of the Repeater . When install-
ing the External Antenna, direct it towards the Base Station to which the Repeater is paired. This external
antenna can extend the range to a base station up to 3280 feet.