manualshive.com logo in svg

NEC ASPILA EX, Руководство по функциям

NEC ASPILA EX - удивительная телефонная система для вашего бизнеса. Легко управляйте своими коммуникациями с помощью нашего быстрого справочного руководства. Скачайте руководство бесплатно на manualshive.com и получите мгновенный доступ к необходимой информации для эффективной работы вашего офиса.

Поделиться
Скачать
background image

Voice Mail

Aspila EX Software Manual

 

Features

373

Programming

•10-09-01 : DTMF and Dial Tone Circuit Setup

Assign at least one circuit for DTMF reception (type 0 or 1).

Use the following as a guide when allocating DTMF receivers:
- In light traffic sites, allocate one DTMF receiver for every 10 devices that use them.
- In heavy traffic sites, allocate one DTMF receiver for every five devices that use them.

•11-07-01 : Department Group Pilot Numbers

Assign a Department Group pilot number for the Voice Mail (8 digits max). The extensions 
are assigned to the group in Program 16-02-01.

•15-03-03 : Single Line Telephone Basic Data Setup - Terminal Type

Set all SLIU ports used for Voice Mail as type 1.

•15-07-01 : Programming Function Keys

Assign a Voice Mail key to an extension. You must enter the Voice Mail key code (code 77) fol-
lowed by:
- Your own extension number if you are setting up your own Voice Mail key.

- A virtual extension number if you are setting up a Message Center key for a virtual extension.
- A co-worker’s extension number if you are setting up a Message Center key for an installed 

extension.

- An uninstalled extension’s number if you are setting up a Message Center key for an unin-

stalled extension.

(Optional) Assign a Voice Mail Record key to an extension (code 69).

(Optional) Assign a Personal Answering Machine Emulation key (code 16).

•16-02-01 : Department Group Assignment for Extensions

Put all the Voice Mail extensions in an extension group. This allows DILs to Voice Mail to 
ring other Voice Mail extensions when the DIL’s assigned port is busy. Assign up to  Voice 
Mail extensions to an Extension (Department) Group. Only one Voice Mail group is allowed 

per system.

•20-02-09 : System Options for System Telephones - Disconnect Supervision

Enable (1) disconnect supervision for the system.

•20-03-01 : System Options for Single Line Telephones - SLT Call Waiting Answer Mode

Enter 1 for this option to enable Conversation Record (Service Code 754) at SLT sets.

•20-03-02 : System Options for Single Line Telephones - SLT MOH or Ringback on Trans-

ferred Calls
24-02-02 : System Options for Transfer - MOH or Ringback on Transferred Calls

Use this option to enable (0) or disable (1) MOH on Transfer. If enabled (0), a transferred 
caller hears Music on Hold while their call rings the destination extension. If disabled (1), a 
transferred caller hears ringback while their call rings the destination extension. For this 

option to work with voice mail, the transferred call must be an unscreened transfer.

•20-06-01 : Class of Service for Extensions

Assign a Class of Service (1-15) to an extension.

•20-13-13 : Class of Service Options (Supplementary Service) - Continued Dialing

Enable Continued Dialing (1) for all extensions that will dial Voice Mail features.

•22-01-04 : System Options for Incoming Calls - DIL No Answer Recall Time

If setting up Delayed Voice Mail Overflow, enter a timer value greater than 0. Overflow will 
occur after this interval (provided the other related programming is correct). If setting up 
Immediate Voice Mail Overflow, enter 0.

•22-02-01 : Incoming Call Trunk Setup

Assign Service Type 4 to each trunk you want to ring into Voice Mail as a Direct Inward Line 
(DIL).

Содержание ASPILA EX











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ASPILA EX

LENCO MDV-8 User Manual preview
MDV-8
Бренд: LENCO Страницы: 27
Caliber MCD065 Instruction Manual preview
MCD065
Бренд: Caliber Страницы: 8
dbx DriveRack PA User Manual preview
DriveRack PA
Бренд: dbx Страницы: 52
EAW Anya Quick Manual preview
Anya
Бренд: EAW Страницы: 9
Jensen JWM10A Owner'S Manual preview
JWM10A
Бренд: Jensen Страницы: 12
YASKAWA SIEMENS CNC Series Maintenance Manual, Serviceman Handbook preview
CNC Series
Бренд: YASKAWA SIEMENS Страницы: 373
µ-Dimension COMPETITION ProZ4-80 Manual preview
COMPETITION ProZ4-80
Бренд: µ-Dimension Страницы: 7
S.E.M. Fusion Z-7799 Quick Start Manual preview
Fusion Z-7799
Бренд: S.E.M. Страницы: 6
Notifier AUTOPULSE IQ-318 Manual preview
AUTOPULSE IQ-318
Бренд: Notifier Страницы: 62
N-Com BX4 PLUS User Instructions And Safety preview
BX4 PLUS
Бренд: N-Com Страницы: 32
Pittway NOTIFIER CBC-CLASS 1 Manual preview
NOTIFIER CBC-CLASS 1
Бренд: Pittway Страницы: 20
Anker A3142 Owner'S Manual preview
A3142
Бренд: Anker Страницы: 19
PNI Clementine 8440 User Manual preview
Clementine 8440
Бренд: PNI Страницы: 8
Samsung MM-77 Service Manual preview
MM-77
Бренд: Samsung Страницы: 69
Cattron Messenger BLE User Manual preview
Messenger BLE
Бренд: Cattron Страницы: 102
Sharp XL-HP550E Operation Manual preview
XL-HP550E
Бренд: Sharp Страницы: 36
Sony HCD-RXD6AV Service Manual preview
HCD-RXD6AV
Бренд: Sony Страницы: 13
Sony hcd-tb20 Operating Instructions Manual preview
hcd-tb20
Бренд: Sony Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды