manualshive.com logo in svg

NEC ASPILA EX, Руководство по функциям, Страница: 367 / 1098

Поделиться
Скачать
NEC ASPILA EX Скачать руководство пользователя страница 367

Toll Restriction, Dial Block

Aspila EX Software Manual

 

Features

353

Toll Restriction, Dial Block

Description

Toll Restriction Dial Block lets a user temporarily block an extension’s Toll Restriction. This helps 
a user block his or her phone from being used by another person while they are away from their 

desk. A user would need to enter a 4-digit personal code to enable/disable this feature. 

Dial Block can also be set by the system administrator. If Dial Block has already been set by an 

extension user, the supervisor can not release it. Additionally, if Dial Block has been set by the 
supervisor, and extension user can not release it.

Important:

 This function works by password and Class of Service control (the supervisor is not an 

assigned extension). If Dial Block is available for all Classes of Service, everyone may become a 
supervisor if they know the Dial Block password.

Conditions

(A.)  If the system is reset by a cold start, the Dial Block feature is cleared.
(B.)  This feature is not available for ISDN S-Bus extensions.
(C.)  Both Programs 21-09-01 and 21-10 can be set at the same time. The system gives priority to 

the setting in Program 21-10.

Default Setting

Disabled.

Programming

•11-10-17 : Service Code Setup (for System Administrator) - Dial Block by Supervisor

Assign a service code (101 by default) to be used by the supervisor to set Dial Block for 
another extension.

•11-11-33 : Service Code Setup (for Setup/Entry Operation) - Dial Block

Assign a service code (100 by default) to be used for Dial Block.

•20-06-01 : Class of Service for Extensions

Assign a COS to each extension (1-15).

•20-08-01 : Class of Service Options (Outgoing Call Service)

Enable (1) or disable (0) an extension’s ability to use Dial Block.

•21-09-01 : Dial Block Setup - Toll Restriction Class With Dial Block

Assign a Toll Restriction Class of Service (1-15) when the Dial Block feature is used.

•21-09-02 : Dial Block Setup - Supervisor Password

Assign a 4-digit password to be used by the supervisor to enable or disable Dial Block for 
other extensions.

•21-10-01 : Dial Block Restriction Class Per Extension

Assign the Toll Restriction class (1-15) to be used by an extension when the Dial Block fea-
ture is enabled. If this data is “0”, Toll Restriction Class follows Program 21-09-01.

•90-19-01 : Dial Block Release

Enter the extension number to be released from the Dial Block restriction. This program can 

be used when a password is forgotten by the user.

Aspila EX

• Available

Содержание ASPILA EX











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов