NEC 900i, Инструкция по установке и эксплуатации

Страница: 62 / 134

Hold i-Series System
2-44
2. Features
Hold
Hold places your call in a temporary waiting state until you can get back to it.
While the call waits, you can process calls or use other features. And don’t
worry if you forget about the call and leave it on Hold too long -- it will recall
back to you.
Your telephone system provides four types of Hold (see the chart below). Your
Communications Manager can tell you which types you can use.
System Hold
To place an outside call on System Hold:
1. HOLD.
To pick up an outside call on System Hold:
1. Press flashing line key.
System Hold
For your normal calls . . .
When you place an outside call on System Hold, it
flashes your line key and the line keys on your co-
worker’s phones as well. Either you or another co-
worker can pick up the call on Hold.
Exclusive Hold
For high priority calls . . .
After you place an outside call on Exclusive Hold, it
flashes your line key but looks busy to your co-work-
ers. Only you can pick up the call from Hold.
Group Hold
Put calls on Hold for your Department Group . . .
If you are a member of a Department Calling Group,
you can use Group Hold. When you place an outside
call on Group Hold, only you and the members of
your Department Calling Group can pick it up.
Intercom Hold While talking to a co-worker . . .
Intercom calls can also go on Hold. However, the
Intercom call on Hold stays on your phone. Another
extension user cannot pick it up.
900ib.qxd 3/26/01 8:52 AM Page 44