iv
SuperScript 870 — Network User’s Guide
FCC Statement
(For United States Use Only)
Federal Communications Commission Radio Frequency Interference
Statement.
WARNING
: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE
: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from the
one to which the receiver is connected.
•
Consult the dealer or an experience radio or TV technician for help
Use a shielded and properly grounded I/O cable to ensure compliance of
this unit to the specified limits of the rules.
Your 870 SuperScript printer with optional Network Interface Card (NIC)
installed meets the requirements of FCC Class A when connected to an
Ethernet cable.
(For Canadian Use Only)
This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus as set out in the radio interference
regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassants les limites applicables aux appareils numériques de Classe
A présentes dans le règlement sur le brouillage radioélectrique édictaté
par le Ministère des Communications du Canada.
Declaration of Conformity
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including
interference that may cause undesired operation.
Type of product: Laser Printer.
Equipment Classification: Class A Peripheral.
Model: SuperScript 870 with Network Interface Card (NIC) installed.
We hereby declare that the equipment specified
above conforms to the technical standards as
specified in the FCC rules.
U.S. Responsible Party: NEC Technologies, Inc.
Address:
1250 N. Arlington Heights Road,
Itasca, Illinois 60143
Telephone Number: 630-467-5000
