NEC 455-01593-000, Руководство по установке

Страница: 17 / 22

Redundant Power Upgrade Kit Installation Procedures 15
Note:
When plugging in the Data cable connector (D)
and the Top and Bottom LED cable connectors (C and E),
pin 1 on these connectors must be positioned to line up with
pin 1 on the corresponding connectors they are plugging
into. For the location of pin 1 on these connectors, see the
following figure.
A
Bottom power supply LED/switch assembly module.
B
Top power supply LED/switch assembly module.
C Top PSU LED cable connector.
D Data cable connector.
E
Bottom PSU LED cable connector.
Attaching the LED/Switch Assembly Module Cables