English
English-16
On-Screen Display (OSD)
Main Menu
Sub Menu
Sub Menu2
Sub Menu3
Explanation
Default
Reset
SCREEN
ASPECT MODE
Selects aspect ratio of the displayed image. Press + or
- to select.
V-POSITION
Controls the vertical position of the image within the
Display area of the PDP.
Press + to move up. Press - to move down.
0
YES
H-POSITION
Controls the horizontal position of the image within the
Display area of the PDP.
Press + to move right. Press - to move left.
0
YES
V-HEIGHT
Adjusts the vertical size of the image.
0
YES
H-WIDTH
Adjusts the horizontal size of the image.
0
YES
AUTO PICTURE
ON:
H-Position, V-Position, Clock and Clock Phase are
adjusted automatically.
OFF:
H-Position, V-Position, Clock and Clock Phase are
adjusted manually.
VGA and RGBHV input only.
OFF
NO
CLOCK PHASE
Adjusts the visual “noise” on the image.
VGA and RGBHV input only.
0
YES
CLOCK
Press + to expand the width of the image on the right of
the screen.
Press - to narrow the width of the image on the left.
VGA and RGBHV input only.
0
YES
UNDER SCAN
Available only when
the Advanced OSD
function is enabled.
ON:
UNDERSCAN is selectable in the ASPECT MODE
menu.
OFF:
UNDERSCAN item is not selectable in the ASPECT
MODE menu.
Video signal input only.
OFF
YES
OPTION1
OSD
DISPLAY OSD
ON: Information about inputs, screen size, etc. is shown.
OFF: No information is shown.
ON
YES
OSD
POSITION
Change the position of the menu between 1 and 6. Press
+ or - to adjust.
1
YES
OSD ORBITER
ON:
The menu position intermittently shifts eight dots
while the OSD is being displayed.
OFF:
The menu position does not shift.
OFF
YES
OSD TRANSP.
Adjusts the transparency level of the OSD.
Press + or - to adjust.
70%
YES
BNC INPUT
Selects the input type when using 5BNC connectors.
RGB: For RGB input.
COMP.: For Component input (3BNC connectors).
SCART1: For SCART input (4BNC connectors).
SCART2: For SCART input (3BNC connectors and VIDEO1
input).
SCART1, SCART2 available for Europe and World-Wide
models only.
RGB
YES
D-SUB INPUT
Selects the input type when using a mini D-SUB
connector.
RGB: For RGB input.
SCART3: for SCART input.
SCART3 available for Europe and World-Wide models
only.
RGB
YES
RGB SELECT
If there is a problem with signal detection, this function
forces the monitor to display the signal at the desired
resolution.
If no problem is detected, the only available option will be
“AUTO”.
VGA and RGBHV input only.
AUTO
YES
HD SELECT
Manually selects signal output when similar 1080I signal
are detected.
1080B:
Standard digital broadcasts.
1080A:
Special digital broadcasts (ex. DTC100).
1080B
NO
INPUT SKIP
Skips to next input if present input signal is not detected.
This function is valid only for INPUT key on the display.
OFF
YES
ALL RESET
Resets settings back to factory default values.
OFF
