8–14
User’s Guide
Vertical Streaks
There may be torn pieces of
paper in the path from a
previous jam:
Check and
clear the paper path.
The toner cartridge may be
damaged:
Replace the toner
cartridge.
Repetitive Marks
The paper path may be
contaminated:
Print several
blank sheets of paper to
clean out any dirt.
The toner cartridge may be
damaged:
Replace the toner
cartridge.
Solid White Vertical Lines
There may be torn pieces of
paper in the path from a
previous jam:
Check and clear
the paper paths.
The toner cartridge may not be
properly installed:
Reinstall
the toner cartridge.
The toner cartridge may be
damaged:
Replace the toner
cartridge.
Blank Spots
The paper may not meet
specifications:
Use
recommended paper.
The toner cartridge may be
damaged:
Replace the toner
cartridge.
There may be moisture in the
paper:
Use fresh, dry paper.
Whenever you send a job to the
printer, an “image” of the page to
be printed is temporarily written to
the rotating surface of an
electrophotographic (EP) drum.
This image acts like a magnet that
attracts toner to the drum. (The
toner and the drum are both located
in the toner cartridge.)
At the same time, the paper (or
transparency film or envelope)
passes through the printer and is
electrostatically charged as it
reaches the drum. The toner that
was previously attracted to the
drum as an image is transferred to
the charged paper. The paper then
passes between two rollers where a
combination of heat and pressure
bonds the toner to the paper. The
paper is then moved to the output
tray.
Whenever you send a job to the
printer, an “image” of the page to
be printed is temporarily written to
the rotating surface of an
electrophotographic (EP) drum.
This image acts like a magnet that
attracts toner to the drum. (The
toner and the drum are both located
in the toner cartridge.)
At the same time, the paper (or
transparency film or envelope)
passes through the printer and is
electrostatically charged as it
reaches the drum. The toner that
was previously attracted to the
drum as an image is transferred to
the charged paper. The paper then
passes between two rollers where a
combination of heat and pressure
bonds the toner to the paper. The
paper is then moved to the output
tray.
Whenever you send a job to the
printer, an “image” of the page to
be printed is temporarily written to
the rotating surface of an
electrophotographic (EP) drum.
This image acts like a magnet that
attracts toner to the drum. (The
toner and the drum are both located
in the toner cartridge.)
At the same time, the paper (or
transparency film or envelope)
passes through the printer and is
electrostatically charged as it
reaches the drum. The toner that
was previously attracted to the
drum as an image is transferred to
the charged paper. The paper then
passes between two rollers where a
combination of heat and pressure
bonds the toner to the paper. The
paper is then moved to the output
tray.
Whenever you send a job to the
printer, an “image” of the page to
be printed is temporarily written to
the rotating surface of an
electrophotographic (EP) drum.
This image acts like a magnet that
attracts toner to the drum. (The
toner and the drum are both located
in the toner cartridge.)
At the same time, the paper (or
transparency film or envelope)
passes through the printer and is
electrostatically charged as it
reaches the drum. The toner that
was previously attracted to the
drum as an image is transferred to
the charged paper. The paper then
passes between two rollers where a
combination of heat and pressure
bonds the toner to the paper. The
paper is then moved to the output
tray.
Содержание 1760 - SilentWriter B/W Laser Printer
