NEC 140He Скачать руководство пользователя страница 174

Страница: 174 / 360

6-4

EXPRESSBUILDER for DOS-Based with Local Console

This subsection describes the procedures for using EXPRESSBUILDER for DOS-based with local console.

Starting EXPRESSBUILDER

The following procedure instructs you to start EXPRESSBUILDER.

IMPORTANT:

Do not remove the EXPRESSBUILDER CD-ROM while

EXPRESSBUILDER is running.

Turn on peripheral devices and the server in this order.

Insert the EXPRESSBUILDER CD-ROM supplied with your server into the CD-ROM drive of your server.

Ensure that the floppy disk drive is empty.

Press the RESET switch or press

Ctrl

Alt

, and

Delete

to reboot from the EXPRESSBUILDER. (You may

also turn off and then on again to reboot the server.)

EXPRESSBUILDER boots up displaying the top menu.

Содержание 140He









































































































































































































































































































































































Результаты поиска

Содержание 140He

Отзывы:

NEC 140He, Руководство пользователя, Страница: 174 / 360

Результаты поиска

Содержание 140He

Отзывы: