Nebiru ZDS Shifter, Руководство пользователя

Страница: 6 / 17

use is marked “center positive”, which generally is indicated by the symbol
Many 9V (and Roland/BOSS) adaptors are center
​
negative
​
, and should not
be used.
MIDI In
Connect your Zendrum or instrument to the MIDI In jack, which can be
identified by the symbol
.
Take care when connecting non-Zendrum instruments as phantom power
is always delivered through the MIDI In jack. This typically won’t be a
problem for most devices as the two pins used to deliver power are usually
ignored.
MIDI Out
If your sound source requires a MIDI Din connection, then hook it up to the
Shifter’s MIDI Out connection, identified by the symbol
. This jack also
doubles as a (soft) MIDI Thru port.
USB
The USB connector is used to connect the device to your computer if you
are using it as a sound source. The USB connection is also used to
program your device via the
​ ZDS Shifter Web Application ​ .
The USB port can also power the Shifter, however, it cannot also power
your Zendrum. If you are using wireless or are powering your Zendrum
from a battery or elsewhere, then powering the Shifter from the USB port
alone is perfectly fine.
© Nebiru Software, 2018 5