Programming the Shifter
Programming the Shifter requires that either Google Chrome or the Opera
web browser be installed.
Connect your Shifter to your computer using a USB cable and navigate to
the
ZDS Shifter Web Application
.
The application is split into two sections. The top section contains a visual
representation of your ZDS Shifter and is where you can set up how the
foot switches behave. The lower section is where you program your shift
rules. For convenience, these rules may be grouped into up to four
different groups, each of which can be controlled by a different CC
message.
Shift Rules
A shift rule works on a single message type and value. They have an
input
and an
output
definition. The Shifter compares each MIDI message it
receives against the list of active shift rules. Any messages that match the
rule
input
are altered so that they match the
output
.
For a rule to be applied to a message, the
input
must match the
message
type
,
channel
and
value
.
The output of the rule can change some or all of these parameters.
Consider this example (utilizing BFD3):
© Nebiru Software, 2018 8
Содержание ZDS Shifter
Страница 1: ...ZDS Shifter Owners Manual Model I...
