background image

again.  A momentary switch is only on as long as the footswitch is 
depressed, and turns off as soon as you lift your foot.  Which you choose 
will depend completely on your style of play and circumstances.  If you 
need to frequently switch between CC states, you may find that the 
momentary action makes more sense.  If on the other hand you only need 
to change states once in a while or once per song, then the latching 
behavior would be better suited. 
 
The final setting for the footswitches is “

polarity

”.  This controls whether 

the CC starts off as enabled or disabled when the Shifter is turned on.  The 
default is ‘initially off’, meaning the CC will turn on when you depress the 
switch.  Alternatively, you can set this to ‘initially on’, meaning the CC 
message will turn off when depressed.  Which you choose is again 
dependant on your needs and situation. 
 

NOTE:

 The Shifter must reboot whenever the footswitches or power LED 

settings are modified.  The reboot is automatic but be aware that the 
interface will go gray for a couple seconds while this is happening. 
 
 
 
 
 

 

 

 

 © Nebiru Software, 2018                                                                                                            14 

Содержание ZDS Shifter


















Отзывы: