Inspector:
You may use this field to record the name of the operator performing the
inspection.
Company:
You may use this field to record the name of the company the inspection is being
performed for.
Notes:
You may use these 2 fields to record notes about your inspection. Work order
numbers, Procedure numbers, setup notes, etc.
5.0
TRANSFERING DATA
With the proper Settings selected as stated in section 4.0 you are ready to begin.
Attach the proper cable between the computer and your TG110 gage. Turn the
TG110 gage on.
5.0.1 Computer Polling – Manual Method
Before starting, set up your Grid Size. To begin, click the Begin Acquisition
button. You will see the current reading of the gage displayed in the Current
Reading box on the computer. To log a reading, select a cell in your grid where
you want the reading to be placed. Next click the Log button. This will take the
current reading and log it into the cell that you have selected. Each time you click
the Log button it will log a reading into the selected cell. To end this process, click
the End Acquisition button.
5.0.2 Computer Polling – Automatic Method
Before starting, set up your Grid Size. To begin, click the Begin Acquisition
button. You will see the current reading of the gage displayed in the Current
Reading box on the computer, and the current reading will also be placed into the
cell you select in your grid. This method will continuously log readings until the End
Acquisition button is pressed.
5.0.3 Download Log Files from Gage
To begin, click the Down Load Log File List button. You will see a box pop up with
a list of all the Log Files on your gage.
Select the Log Files you would like to down load to your computer. To do this,
highlight with your mouse the items in the box you want to select. You may select
