NDT Systems TG110DL Скачать руководство пользователя | Manualshive

Страница: 23 / 61

background image

TG110DL User’s Manual

22 |

P a g e

NDT Systems, Inc.

5542

Buckingham Drive

,

Huntington Beach, CA 92649

,

PH: 714-893-2438

13. ACCESSORIES

Standard Accessories:

The standard TG110DL Kit contains the TG110DL gauge (batteries installed), TG-506 Probe,

LMD1 Probe Cable, Plastic Couplant Bottle, Operating Manual.

Optional Accessories:

Detachable wrist strap, Flared Probe Holder, Accessory Carrying Case. Other accessories

include Mini-Probes with top or side-mounted integral cables. Ultrahigh-Temperature Probe, Hi-Power Probe,
Probe Cables, Spring-Loaded V-Groove Probe Housings and a Slip-On Protective Leather Case for the gauge.

Optional Software:

Through-Paint mode, Velocity gaging mode

Probes:

TG-

506 “Standard ”

STANDARD PROBE (-15/F - 250/F) Dual-element, top-mounted microdot connectors, 0.040 to 20.00 inches

thickness range, 5 MHz, 0.375 inch diameter element 0.60 inch diameter by 1.30 inch long case. “Requires LMD1

cable (not included).

TG-560P

THROUGH-PAINT Integrated delay line, Dual-element, top-mounted microdot connectors, 0.110 to 3 inches

thickness range, 5 MHz, 0.375 inch diameter element 0.60 inch diameter by 1.30 inch long case. “Requires LMD1

cable (not included).

TG-556

EXTENDED TEMP STANDARD PROBE (-15/ - 600/ F) Dual-element, top-mounted microdot connectors, 0.040 to
20.00 inches thickness range, 5 MHz, 0.375 inch diameter element 0.60 inch diameter by 1.30 inch long case.

“Requires LMD1 cable (not included).

TG-505

MINI PROBE Dual-element, non-detachable side-mounted cable, 0.040 to 2 inches thickness range, 5 MHz, 0.30
inch diameter element, 0.44 inch diameter by 0.45 inch long case.

TG-508

MINI PROBE Dual-element, non-detachable side-mounted cable, 0.060 to 2 inches thickness range, 5 MHz, 0.30
inch diameter element, 0.44 inch diameter by 0.45 inch long case.

TG-505TM

MINI PROBE Dual-element, non-detachable top-mounted cable, 0.040 inch to 2 inches thickness range, 5 MHz,
0.30 inch diameter element, 0.44 inch diameter by 1.55 inch long case.

TQ-506

ULTRA-HI-TEMP PROBE Dual-element, intermittent operating temperature to approximately 1000°F (538°C), top-
mounted microdot connectors, fused quartz delay line, 0.200 inch to 9.999 inches thickness range, 5 MHz, 0.375

inch diameter element, 0.60 inch diameter by 3.31 inch long case. “Requires LMD1 cable (not included).

«
...
21
22
23
24
25
...
»

Содержание TG110DL






























































Отзывы:

Нет отзывов

Похожие инструкции для TG110DL

Бренд: DAE Страницы: 28

Бренд: Omega Страницы: 74

Бренд: Omega Страницы: 24

Бренд: Pangea Страницы: 2

Бренд: Garmin Страницы: 22

Бренд: horiba Страницы: 27

Бренд: Samsara Страницы: 16

Бренд: Young Страницы: 5

SiteHawk SK-6000

Бренд: BIRD Страницы: 69

Бренд: Lambda Страницы: 35

Бренд: wattwatchers Страницы: 14

AquaInform Sycon 2500

Бренд: WACON Страницы: 52

Бренд: Hanna Instruments Страницы: 2

Бренд: A&D Страницы: 7

Бренд: Xylem Страницы: 44

Бренд: Vmetro Страницы: 186

Бренд: Fisher Research Labs Страницы: 20

Бренд: Chauvin Arnoux Страницы: 92

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды