TG110DL User’s Manual
17 |
P a g e
NDT Systems, Inc.
5542
Buckingham Drive
,
Huntington Beach, CA 92649
,
PH: 714-893-2438
AUTO-HOLD:
When a coupled probe is lifted from the material surface, the Last thickness reading taken is
conveniently retained on the display until either another thickness reading is taken, the two-minute non-usage
lapse (Auto-Shutoff) occurs, or ON/VEL is depressed. This Auto-Hold feature does not affect readings as the
coupled probe is scanned over a surface. The display updates approximately four times per second whenever the
probe has valid coupling with the surface of a test object.
AUTO-SHUTOFF:
The TG110DL automatically turns itself off approximately three minutes after non-use, thereby
eliminating the need to use the OFF switch. To reset the turnoff timer, take a thickness reading or press the ENTER
key. All TOUCH-COMMAND settings (calibration settings plus Touch Codes) are retained in memory (even when
the gauge turns its power off).
KEYPAD LOCK:
Use the keypad lock function to prevent accidental changes to the measurement settings. Engauge
the keypad lock by holding down the ZERO and ON/OFF buttons at the same time until “L” is displayed next to the
battery charge indicator. When locked, only the ON/OFF button will respond to user inputs. To disengage keypad
lock, hold down the ZERO and ON/OFF buttons until the “L” disappears. Full functionality will be restored.
