NDS POWERSERVICE PLUS 25, Руководство пользователя

Страница: 16 / 44

8. installation
power service can be installed easily and securely thanks to
the external flanges (aluminum feet)
.
The ideal mounting position is smooth, well ventilated and not
subject to overheating; avoid surfaces covered with fabric or
carpet. Install the device as close as possible to the service
batteries.
power service can work in any position; if installed on a
vertical wall, it is recommended to keep the short side parallel
to the floor, with connections downwards. Do not install the
device close to sources of heat or in a place that is not
adequately ventilated and that could reach very high
temperatures (eg
. engine compartment).
1. Set the power switch to 0 .
2. Connect the negative pole of the STARTer BATTERY to
power service Pin N°1.
16
caution
power service Gold version integrates a 230VAC battery
charger, therefore: pre-existing chargers, external chargers,
integrated in the control unit chargers, must be uninstalled!