manualshive.com logo in svg

NCR RealScan 7802, Руководство пользователя

Поделиться
Скачать
NCR RealScan 7802 Скачать руководство пользователя страница 12

NCR RealScan 7802 Price Verifier User Guide

06/03

497-0425530    Release E

12 of 94

The wall mount bracket and housing are specifically designed to make installation easy.
Removal has been made far more difficult to prevent vandalism. Unless you know
exactly how to do it, removal is almost impossible without destroying the unit.

Mounting to a Wall

1.

 

Remove the bracket from the housing by pushing flat blade screwdrivers into the
release slots in the bottom of the mounting bracket.

2.

 

Hold the bracket up to the wall where you want to mount the unit, 

slots facing

down

, and drill the 3 (or 4) mounting holes.

3.

 

Using an appropriate fastener for the type of wall, attach the bracket securely, 

slots

facing down

.

4.

 

Slide the RealScan 7802 housing onto its bracket until it snaps in place – the housing
should slide all the way onto the bracket with the rear touching the back of the
bracket when it snaps in. If the RealScan 7802 has connectors hanging down, make
sure they are not caught between the bracket and the housing.

CAUTION:

 Do not install mounting bracket with the slots facing up. The bracket cannot

be removed again without disassembling the unit.

Mounting to Column

1.

 

For columns larger than 18” in diameter, regardless of construction, either wall
mount bracket may be used with shim washers on the outer mounting screws
between the U bracket and the column. Sufficient washers should be used to
prevent the bracket from bowing when it is secured in place. The width of the U
bracket should be 6” at the open end of the U when correctly mounted and not
bowed.

2.

 

Slide the RealScan 7802 housing onto its bracket until it snaps in – the housing
should slide all the way onto the bracket with the rear touching the back of the
bracket when it snaps in. If the RealScan 7802 has connectors hanging down, make
sure they are not caught between the bracket and the housing.

Mounting to a Pole

CAUTION: 

The pole mount should only be used on rigid aluminum or steel poles less

than 18” in diameter. Wood, plastic or other compressible materials are not suitable for
use with the pole mount.

1.

 

Any column under 18” in diameter is called a pole in this section. A pole-mounted
unit uses the same wall mount bracket previously described with the addition of a
piggyback pole bracket and a worm drive flexible strap.

Содержание RealScan 7802































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды