NCR RealPOS 80c, Руководство пользователя

Страница: 137 / 165

Appendix A: Retail Keyboard Key Layouts A-3
68-Key Keyboard Special Keypad Mode
To use the 68-key keyboard to run PC setup routines, the operator can
place the keyboard into a special alternate layout mode that replaces
the normal layout of the keypad and function keys.
The alternate layout has the following keys:
F1 Up Arrow +
F2 Down Arrow -
ESC Right Arrow TAB
END Left Arrow ENTER
Note:
The 68-key keyboard’s special PC Setup mode is provided
simply as a convenience feature. If the operator prefers not to use this
mode, simply use a PC keyboard for system configuration.
To enter the special
PC Setup mode, proceed as follows:
1. Power-up the system.
2. After the memory test completes, hold down key number 36 and
key number 38 simultaneously (refer to the keypad layout in this
chapter).
Make sure both keys are held down together on the full-featured
68-key keyboard. The status LED flashes red/green to indicate that
the keypad entered the
PC Setup mode. On the 68-key keyboard
with no MSR, the speaker sounds one long beep.
Note:
Ignore any stuck key error messages displayed as a result of
the keys being held down.
The 36 and 38 keys must be the first two keys pressed after a
power-on. If any other keys are pressed first, pressing the 36 and 38
keys simultaneously will not put the 68-key keyboard into the PC
Setup mode.