15
Document Number
DCV-00402
Date Released
Jun. 2019
Revision Number/Security level
R02 S2
Retrofit G6+InvencoLink Wayne Vista 3V (US) Installation Guide
Fig. 4.8b
–
Location of the screw that needs removal
9.
Remove the ¼” head ground strap screw from the earth plate on the dispenser door. Retain the
screw for later use:
Fig. 4.9
–
Location of the ground strap screw
10.
Remove the Display Assembly from the electronics head bezel by lifting the bottom of it up and
out. Set the assembly aside to be discarded. (Fig 4.10b)
Note
:
For Narrow Frame Dispensers, you may need to remove one of the Totalizer Window
screws in order to make clearance when removing the Display Assembly. Remove this
screw and retain it. It will be re-installed later during the Installation Procedure. (Fig
4.10a)
This screw may
remain in place
Remove this
screw
Variant
rain catcher
Remove this
screw
