NCR 7193, Руководство по обслуживанию

Страница: 74 / 84

Appendix E: Commands 7193 Service Guide
August 1998 68
Printer Function Commands
These commands control the following basic printer functions and are listed in numerical
order of their Hex codes:
•
Printing
•
Feeding the paper
•
Resetting the printer
•
Cutting the paper
•
Opening the cash drawers
•
Defining the print area
Printer Function Commands
Hex Code Command
09 Horizontal Tab
0A Line Feed
0D Carriage Return
10 Clear Printer
14 n Feed n Print Lines
15 n Feed n Dot Rows
16 n Add n Extra Dot Rows
17 Print
19
1B 69 Full Knife Cut
1A
1B 6D Partial Knife Cut
1B 07 Generate Tone
1B 14 n
Set Column
1B 20 n
Set Character Right Side Spacing (Not Implemented)
1B 24 etc. Set Absolute Starting Position
1B 32 Set Line Spacing to 1/6 Inch
1B 33 n Set Line Spacing to n Minimum Units
1B 3D n Select Peripheral Device
1B 40 Initialize Printer
1B 44 etc. Set Horizontal Tab Positions
1B 4A n Print and Feed n Minimum Units
1B 5C etc. Set Relative Starting Position