NCM Munich N8C, Руководство пользователя

Страница: 8 / 32

06
SAFETY
NCM
MUNICH N8C 36V
2.3 Transport
Transport by car
Batteries should be removed from the bike during transport by car, as they may be damaged through excessive and
repeated shocks or by foreign objects striking the bike at high speed.
Please remove the batteries and keep them inside the car during transport.
Remove the front wheel for transport
- Open the quick release lever (1) and loosen the axle nut (2) a few turns.
- Remove the front wheel (3) from the fork downwards.
Install the front wheel
- Insert the front wheel (3) into the dropouts (4) of the fork.
- Tighten the axle nut (2) and close the quick release lever (1).
- The lever must be pointed upwards (and aligned with the fork to prevent snagging) and should be closed with noticeable
counter pressure.
WARNING:
● To avoid any danger, after you have installed the wheel, please test the brake system before cycling.
● If the quick release lever is not completely closed, it may fully open again easily. This can cause the wheel to fall off the
bike, leading to serious falls and bike damage. To ensure that your wheel is securely in place, the quick release lever
should offer considerable resistance when closing by hand and must always be fully closed before riding.
2.4 Keys
Each NCM E-bike comes with two copies of the battery lock key. Bikes with rim locks are delivered with extra keys (not the
same key as the battery). Onboard charging of the battery will likely lead to infrequent usage of the battery lock key; it is
needed for maintenance and repair, however, so please keep this in mind when storing the key.
● Make sure to always have at least one spare key.
● Keep spare key(s) in a safe place for repairs, maintenance and emergencies.
● Please bring the key when going to your NCM dealer for maintenance or repairs.
4
1
2
3
4