NCI Technologies NCI - 465 WMU, Руководство пользователя

Страница: 59 / 60

NCI ‐ 465 Firmware Version 5.2.9.8 55
8 Troubleshooting Table
The following table will provide some troubleshooting steps you may use before calling for support.
Symptom Troubleshooting Steps
Unit will not turn on
1) Press and hold power key for two
seconds
2) Plug unit into a power source
3) If Yellow power LEDflashes, wait 5
minutes then power up
4) If no power LED light up, try a different
power source (borrow a different AC
charger)
5) If no power LED light up, arrange to
return unit for repair
Unit will not sync to any service 1) Ensure the test cord is inserted correctly
into the unit, slide the metal retaining clip
up, push the test cord into the NCI ‐ 465,
and slide the metal retaining clip down,
retest.
2) Try a different test cord from a co ‐ worker
3) Arrange to return unit for repair
Automotive charger does not work, but AC
adapter does work.
1) Plug automotive charger into a 12 volt
outlet and check for a red light on
charger. If not lit, replace fuse in
automotive charger with a new 6 amp
fuse.
2) If red light still is not on, check the 12 volt
outlet you are using for power
3) If red light is on, ensure the small plug is
fully inserted into the NCI ‐ 465 meter
4) If yellow power light on meter is still not
on (and you know that the battery is not