5
© 2015 nbn co limited | ABN 86 136 533 741
Your broadband services will be delivered through the data
(UNI-D) ports on the
nbn™
connection box. Your service provider(s)
should advise you which data (UNI-D) ports have been designated
for your services, and how to connect any necessary equipment to
the correct port for each service.
All the cables required for the
nbn™
connection box to operate will
be supplied and connected by your installer. Any extra cables
required to connect your own equipment to the
nbn™
connection
box will need to be supplied by you or your service provider.
The cable that connects the
nbn™
connection box to the
nbn™
outdoor antenna is supplied by
nbn
and will be fitted to the
nbn™
connection box by the installer. The cable connection is protected
by a tamper-evident cover. Do not attempt to remove this connection
or connect to it.
Connecting the
nbn
™
connection
box to your own equipment
If you have followed the instructions from your service
provider and your internet or other broadband connections
are NOT working, or there are any red or flashing lights on the
nbn™ connection box, go straight to the TROUBLESHOOTING
guide on page 8.
The back of the
nbn™
connection box has a row of ports like this;
The four data (UNI-D) ports are to
connect data and in-band video services,
using Ethernet RJ-45 cables.
Port for
the power
cable.
Power
Data (UNI-D) Ports
This Wireless Outdoor Unit (ODU)
is the property of the
nbn™
DO NOT REMOVE
WNTD
Property
of nbn™
DO NOT REMOVE
SIGNAL STRENGTH
ODU
STATUS
