NBK EPU-220, Инструкция по эксплуатации

Страница: 20 / 52

19
4
Installation and Connections
4.2.2 If Using the Mounting Plates (Optional)
The mounting plates can be used when replacing digital position indicators with a size of 22 mm
(0.866 in.) as shown in Fig. 1 or 30 mm (1.181 in.) as shown in Fig. 2.
Corresponding Positions of Positioning Pin (Unit: mm (in.))
Position of positioning pin
Size
Digital position indicators
Mounting plates
22 mm
(0.866 in.)
Fig. 1
22 (0.866)
Φ
6 (0.236)
max.
Φ
20 (0.787)
30 mm
(1.181 in.)
Fig. 2
Φ
6 (0.236)
30 (1.181)
max.
Φ
20 (0.787)
Turn the positioning pin to the left and
remove by using a flathead screwdriver or
similar, and change the position.
(Recommended tightening torque: 0.3 N m
(2.65 lbf in.))
Positioning pin
22 (0.866)
Positioning pin
30 (1.181)
This is the position when shipped from the
factory. Check that the positioning pin is
tightened before use.