NBK EPU-220, Инструкция по эксплуатации

Страница: 30 / 52

29
4
Installation and Connections
3
With the mounting plate for high
torque adapter mounted to the high
torque adapter, pass the rotating shaft
through the ⑦ Output shaft.
Insert the ⑧ Positioning pin into the ⑨
Positioning pin hole.
Be sure to maintain the amount of
protrusion of the rotating shaft at 38
mm (1.496 in.) or more.
4
Fully tighten the temporarily fixed
① Hex socket head cap screws
(M4x8).
(Recommended tightening torque:
0.75 N m (6.63 lbf in.))
5
Secure it in place by using the ⑩ Hex
socket set screws (M6x6) included
with the high torque adapter.
(Recommended tightening torque: 5 N m
(44.2 lbf in.))
6
From this point, perform the same
procedures of "If Using the High
Torque Adapters (Optional)" starting
from step 4.
Refer to P. 25 .
⑨ Positioning pin hole
⑦ Output shaft
⑧ Positioning pin
mi
n.3
8
① Hex socket head
cap screws
⑩ Hex socket set screws