NBK EPU-220, Инструкция по эксплуатации

Страница: 27 / 52

26
4
Installation and Connections
6
With the collar mounted, pass the ⑫
Input shaft of the high torque adapter
through the unit's output shaft.
Insert the unit's ⑬ Positioning pins into
the ⑭ Positioning pin holes of the high
torque adapter.
7
Fully tighten the ⑪ Hex socket set
screw to secure it in place.
(Recommended tightening torque: 2.8 N m
(24.7 lbf in.))
It can be mounted at any 90°-angle
orientation. Mount in a position that
does not interfere with the machine.
⑫ Input shaft
⑭ Positioning
pin hole
⑬ Positioning pins
⑪ Hex socket set screw