manualshive.com logo in svg

NBB Planar-D1, Руководство по эксплуатации

Поделиться
Скачать
NBB Planar-D1 Скачать руководство пользователя страница 26

26

Planar

®

-D1 / Compact-M2  R7

General information

US-FCC and CANADA IC

>

 FCC notes

Part 15.105 Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class  

A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  

provide reasonable protection against harmful interference when the equipment is  

operated in a commercial environment. This equipment generates, uses, and can radiate 

radio frequency energy and, if not installed and used in accordance with the instruction 

manual, may cause harmful interference to radio communications. Operation of this 

equipment in a residential area is likely to cause harmful interference in which case the 

user will be required to correct the interference at his own expense.

Part 15.21 Statement

Changes or modifications made to this equipment not expressly approved by  

NBB Co Components GmbH may void the FCC authorization to operate this 

equipment.

>

 IC notes

The installer of this radio equipment must ensure that the antenna is located or  

pointed such that it does not emit RF field in excess of Health Canada limits for the  

general population; consult Safety Code 6, obtainable from Health Canada’s website 

www.hcsc.gc.ca/rpb.

>

 RSS-GEN

This device complies with Part 15 of the FCC Rules and with Industry Canada licence- 

exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2)  this device must accept any interference received, including interference that may 

cause undesired operation.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils 

radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et 

(2)  l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage  

est susceptible d’en compromettre le fonctionnement.

Содержание Planar-D1



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды