NBB Planar-D1, Руководство по эксплуатации

Страница: 29 / 66

29
Planar
®
-D1 / Compact-M2 R7
DE
EN
IT
Commissioning
> Operating voltage 2.4 V / 3,0 V
Loosen the retaining screw of the battery compartment on the back site of the transmitter
and remove the cover. Insert 2 fully charged AA 1.2 V NiMH batteries (or 1.5 V batteries)
in the battery compartment, close cover and tighten retaining screw.
If the NBB radio control system won’t be used for a long period of time, it is strongly
recommended remove the battery from transmitter and charge the battery approx.
every 4 weeks. This prevents deep discharge of the battery and enhances its service life.
> Battery life warnings
The quick blinking of the letter “L” in the display shows the end of the battery capacity.
From this time the operation of the transmitter is approx. 30 minutes possible. During
this time, bring the unit into a safe position, switch off the transmitter and replace the
batteries with charged batteries. For transmitters without an LED display, the information
is displayed in the monochrome.
> Energy saving function
If no buttons are pressed within a specified time*, the transmitter switches off automatically.
The display turns off. A transmitter can also be manufactured without a standby function
for continuous operation as an option.
* The standby time is set to 60 minutes by default.
Safety equipment
> Safety equipment in the NBB radio control system
– EMERGENCY STOP or STOP function
– Zero position interlock
Please check the sleeves and the housing for breaks and cracks each time before com-
missioning the transmitter. Contact your service team if necessary. Non-observance can
cause malfunctions and water damage.
Charge the rechargeable battery
completely before initial use.
1. Loosen the retaining screw 2. Remove the cover