USA:
IC CANADA:
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
The installer of this radio equipment must ensure that the antenna is located
or pointed such that it does not emit RF field in excess of Health Canada limits for the
general population; consult Safety Code 6, obtainable from Health Canada’s website
www.hcsc.gc.ca/rpb
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause unde-
sired operation of the device.
RSS-GEN 8.3 statement:
This radio transmitter (identify the device by certification number) has been approved by
Industry Canada to operate with the antenna types listed below with the maximum permis-
sible gain indicated. Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this device.
Please update accordingly
Cet appareil est conforme avec Industrie Canada exempt de licence Rss standard(s).
Son fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne peut causer d'interférences, et
(2) cet appareil doit accepter toute interférence, y compris des interférences qui peuvent
provoquer un fonctionnement indésirable du périphérique.
ATTENTION:
Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment!
FCC part 15.203 statement:
This device is delivered and installed by the original manufacturer of the machine or
delivered and installed by NBB Controls Inc, Richmond VA. It is approved by FCC to
operate with the antenna originally supplied by the original manufacturer of the
machine or NBB Controls, Inc, Richmond VA. It is unlawful to change the antenna or
change the antenna installation. Only antennas declared as original spareparts are
allowed. Otherwise there is now allowance and it is illegal to operate this device !
Attention:
9. US-FCC and CANADA IC
