%
%
Receiver with integrated mounting holes.
Multi-pin connecting cable for the receiver according to your
specifications.
For explanatory notes on obtaining an operating permit please refer to registration docu-
ments enclosed in the appendix of this operating instruction. Observe all applicable work-
safety and accident prevention regulations carefully. Only fully trained, authorized per-
sonnel may use the NBB radio control equipment. Components, etc. built into the NBB
equipment for safety purposes must be regularly inspected.
Failure to observe these recommendations will put both you yourself and others at risk.
Under these circumstances, NBB rescinds the guarantee and any other form of liability.
This radio control unit is designed exclusively for the control of construction machines
and industrial plants. Only under these conditions are the safety systems (STOP, resp.
EMERGENCY STOP, zero setting) fully effective. No other form of use is permitted. Any
non-observance of this condition will relieve NBB of all liability.
Optional:
The actual delivery specification is as detailed on the confirmation of order or the delivery
note accompanying the goods!
Even if you are accustomed to working with radio control systems, read these operating
instructions carefully before using this equipment. Only this document contains the latest
information relating to your NBB radio control system.
If the NBB radio control unit determines a fault, it must be shut down immediately. The
transmitter should be switched off with the STOP key, resp. EMERGENCY STOP switch.
The connecting cable must be disconnected at the receiver from the connecting socket
(terminal) of the unit to be controlled . The repair of the equipment must not be carried out
other than by NBB or an NBB authorized technician.
1. STANDARD SPECIFICATION
2. SAFETY PRECAUTIONS
