To Use the Timer Mode
• Once a target time has been set (for
example 3 hours), press the [S/S]
button once to start the countdown.
The countdown time will be displayed
continuously throughout the
countdown.
• To stop counting, press the [S/S]
button once.
To Reload the Timer
• Hold the [R] button to reload the
timer to the preset target time when
the counting is stopped.
• To start the counting at a target time,
set a new value for the pre-defined
target time. Check the previous
chapter 8.0 for more detail on how to
set the Target Time.
Timer Alarm Sound
• When the timer reaches the last 10
seconds, the watch will beep once for
each second left. When it hits zero, the
watch will beep for about 15 seconds
• You can stop the beeping by pressing
any button.
Note:
This diagram illustrates the flow
among different functional
displays only, hence, these
displays DO NOT conform to
fact in all instances.
Timer Mode
(Finish Counting)
Timer Mode
(Counting)
Timer Mode
(Stop Counting)
Timer Mode
(Timer initialized)
counting
stop
counting
Hold [R]
Hold [R]
[S/S]
[S/S]
Pre-defined
Target Time
Current Time
4:59’59”
Timer Mode - Using Timer
8.1
