Naxa NPB-428, Инструкция по эксплуатации

Страница: 14 / 30

Page 14 Naxa Electronics
Basic Functions
Turning the Unit On and Off
To turn the unit on, press the STANDBY (power) key [6].
The Power indicator [7] will light up.
To turn the unit off, press the STANDBY key [6] again.
Adjusting the Volume
Turn the VOLUME dial [10] clockwise or counter clockwise
to increase or decrease the volume level, respectively.
Bass Boost
Turn the Bass Boost adjustment on to emphasize low
frequency sound output.
Press the BBS key [16] to turn Bass Boost on and off.
ѥ L
Producing low frequencies at high volumes
can be demanding for audio equipment. If you
experience audio clipping when Bass Boost is
turned on, lower the volume gradually.
Using the Radio
Set the FUNCTION switch [11] to the RADIO position to
start using the radio.
1. Select a frequency band. Set the BAND switch [12]
to the AM, FM, or FM ST. position.
ѥ L
Select the FM band (mono) when tuning to
a station with a weak signal. Select the FM
ST. (stereo) band when the signal is strong.
The FM ST indicator [8] will light when the
tuner is locked in on a stereo signal.
2. Turn the RADIO TUNING dial [17] to tune to a radio
station; the current station can be seen on the LCD
screen [15].
3. Optimize radio reception:
• Fully extend the telescopic Antenna [1] and
adjust its orientation to optimize FM radio
reception.
• The AM antenna is built into the player. Adjust
the orientation and position of the player itself
to optimize AM radio reception.