Naxa NPB-428, Инструкция по эксплуатации

Страница: 22 / 30

Page 22 Naxa Electronics
Using the AUX Input
Set the FUNCTION switch [11] to the CD/MP3/USB/AUX
position to play devices connected to the AUX Input
jack [13].
1. Connect the audio source to the player. Use an
optional audio patch cable to connect the 3.5mm
headphone or line-out jack of the audio source to
the 3.5mm AUX Input jack [13] found on the front of
the player.
2. Prepare the player. Set the FUNCTION switch [11] to
the CD/MP3/USB/AUX position. Turn the VOLUME
dial [10] to lower the volume level.
3. Prepare the audio source. Start playback on the
device. Set the volume level of the device to ap-
proximately 80% of its maximum.
4. Adjust the final volume. Turn the VOLUME dial [10]
of the player to set the volume to a comfortable
level.
ѥ L
Use the audio source to control playback
(e.g., stop, play, next). Use the player to
control the volume.