Naxa NAS-3072, Инструкция по эксплуатации

Страница: 6 / 14

Page 6 Naxa Electronics
Using USB & SD Mode
Install a USB drive or SD memory card and then press
MODE [11] to set the active mode to USB or SD.
Install a compatible USB drive or memory card with
music files on it.
• The speaker will automatically detect the drive or
card and the Status LED [9] will light blue.
• The speaker will automatically switch modes, and
attempt to play music from the drive or card.
⚠ L
Please refer to the Specifications section to
learn more about compatibility.
To do this... ...do this
Start, pause, or resume playback. Press .
Skip to the next track. Press .
Skip to the previous track. Press .
Change the active mode (Bluetooth
®
,
SD, USB, FM, and AUX).
Press MODE.
Using FM Radio Mode
Press MODE [11] to set the active mode to FM.
⚠ L
You must connect the included AUX cable
to the AUX connector [2] in order to use
the FM radio. The AUX connector is also
used for FM radio reception.
To optimize reception, extend the connect-
ed AUX cable and adjust its position.
FM Radio Controls
To do this... ...do this
Tune to the next station Press .
Tune to the previous station. Press .
Scan for stations and auto save
them to preset memory Press .