Naxa NAS-3072, Инструкция по эксплуатации

Страница: 5 / 14

www.naxa.com Page 5
Using Bluetooth
®
Mode
Pairing a Device with Bluetooth®
A device must be paired with the speaker before using
them together for the first time.
Make sure Bluetooth is enabled on your device before
attempting to pair it.
When you turn on the speaker, it will automatically
search for a paired device. If it does not detect a paired
device, it will switch to Pairing mode (the Status LED
will [9] flash blue and the speaker will bee twice). Then:
1. Use your device to search for nearby Bluetooth
connections. (This function is usually in the Blue-
tooth settings menu; refer to your device’s instruc-
tion manual to learn more.)
2. The speaker will announce itself as NAXA NAS-
3072. Select it from the list of devices.
3. If your device asks for a passcode, use “0000” to
complete the pairing process.
When the speaker is paired and connected to a device,
the speaker will beep and the Status LED [9] will blink
blue slowly.
⚠ L
To enter pairing mode when the speaker
is already on, turn it off and then back on
again.
Bluetooth
®
Mode Controls
When the speaker is connected to a Bluetooth
®
device:
To do this... ...do this
Start, pause, or resume audio
playback Press .
Skip to the previous track Press .
Skip to the next track Press .
Adjust the volume level Turn the Volume dial.
⚠ L
You may also use your device to control
playback. Some devices may not support
remote Bluetooth
®
controls.