Naxa NAS-3072, Инструкция по эксплуатации, Страница: 7 / 14

www.naxa.com Page 7
Automatic Station Scan
Use the station scan feature to find stations within
broadcast reception range and save them to preset
memory.
1. Press [5] once. The sound bar will search for and
store stations automatically.
Using the AUX Input
Connector
Connect devices without Bluetooth
®
by using the AUX
connection. A 3.5mm stereo patch cable is required to
make this connection.
1. Press MODE [11] to switch the speaker to AUX mode.
2. Use the included AUX cable to connect the device’s
headphone or line-out jack to the AUX connector
[2] found on the side of the speaker.
3. Turn on the device and the speaker. Lower the vol-
ume on both.
4. Set the device volume to 80% of its maximum and
then start playback.
5. Turn the volume dial [8] to increase the volume
gradually to a comfortable level.
⚠ L
Use the connected AUX device to control
all functions in AUX mode. The speaker can
only be used to adjust the volume.