NavSure N420i, Руководство пользователя

Страница: 67 / 78

67
•
Distances: Distances: Distances: Distances: you can also find some distance buttons in this list. They are similar to
the ones in the Bypass list of the Recalculate menu (Page 61), but these can also
be used for distant parts of the route.
Note:
Note:
Note: Note: You need not open Itinerary if you run into a roadblock or traffic jam. To get an
immediate alternative route use the Bypass function of Recalculate (Page 61).
Note:
Note: Note:
Note: When you use this feature, Navsure will keep on excluding the same part of
the map from later routes until you manually delete the route (Page 62), or restart
Navsure.
3.6.3.4 3.6.3.4 3.6.3.4 3.6.3.4 Fly Fly Fly Fly Over Over Over Over
This feature has no navigation function, it merely provides a quick view of the route.
It will present a simulation of the route showing what you will see later when
navigating.
Lifelike
Lifelike Lifelike
Lifelike simulation
simulation simulation
simulation
Tap the Fly Over button.
In this mode the simulation is run at normal speed (using the speed limit of the
streets and roads in the route), and voice instructions are also played.
This mode is mainly useful for demonstrating Navsure, or to learn the way it works
before you start your first journey.
Tap anywhere on the screen to stop the simulation.
3.6.3.5
3.6.3.5 3.6.3.5
3.6.3.5 Edit
Edit Edit
Edit
Tap Edit to see the list of all points used in the route. The first item in the list is the
departure point of the route without a valid GPS position, the last reached via point if
you open the list during navigation, or the point where Navsure most recently
recalculated the route. This means the list is permanently updated, and via points
drop out during the journey. The last item in the list is your final destination.
Use the arrows on the right to browse through the list and tap any line to highlight it.
You can perform the following operations:
•
Add: Add: Add: Add: you can add a new route point (or a new final destination if the
highlighted item is the last one in the list) after the selected point. The Find menu