TRACKER 5505/5505i/5605 Installation and Operation Manual
12
NAVMAN
2-7 Simulate mode
In Simulate mode, the TRACKER ignores data
from the GPS antenna and other transducers
and sensors and the TRACKER generates this
data itself. Otherwise, the TRACKER functions
normally.
There are two simulate modes:
Normal:
Allows a user to become familiar
with the TRACKER off the water.
Demo:
Simulates a boat moving along a
route and automatically displays different
TRACKER functions.
To start and stop Simulate mode, and for more
information, see section 14-11. In simulate
mode,
Simulate
or
Demo
flashes at the
bottom of the display.
SmartCraft menu and displays
The SmartCraft displays require a SmartCraft
system to be installed. For information on
using SmartCraft, see the
SmartCraft Gateway
Installation and Operation Manual
.
To go to a display, press
, press
or
to select the type of display to show, press
or
to select the display from the list, then
press
.
2-8 The main displays
Chart menu and displays
The available displays depend on the optional
sensors and instruments that are installed (see
section 1-1).
CAUTION
!
!
CAUTION
DANGER
WARNING
Never have Simulate mode on when the
TRACKER is navigating on the water.
www.Busse-Yachtshop.de email: [email protected]
