![background image](http://html1.mh-extra.com/html/navman/g-pilot-3380/g-pilot-3380_operation-manual_3610280025.webp)
26
NAVMAN
G-PILOT 3380 Operation Manual
4-3
Display > Compass
Displays a standard G-PILOT display with just the essential G-PILOT data.
Display area
Function
1
Data Header
Customizable data cells. Each display page has a separate header
configuration. Default: Course to steer, Heading, Alarm Status
(see section 5).
2
Drive
indicators
Left and right boxes ‘fill up’ to indicate when the G-PILOT is driving the
rudder and how much power is being used by the drive system
3
Compass card
Compass card rotates to show the heading of the vessel under the lubber
mark.
4
Course arrow
STBY
mode: points to the current heading
AUTO
mode: points to the set course, except for:
GPS
mode: points to the bearing to waypoint
5
Deviation bar
Moves laterally to show course information.
Note:
This bar can be configured to display different items.
Default: Automatically switches between Rudder angle, Course error and
Cross track error.
6
Deviation scale
Indicates what data the deviation bar is currently showing and the
magnitude
7
Mode panel
Left hand side: shows the steering mode (COMPASS, GPS, WIND)
Right hand side: shows the operating mode (Standby, Auto, H-Steer) inside
a colored tab.
Panel changes to blue when in
AUTO
mode. The colored tab is yellow in
STBY
mode, green in
AUTO
mode, magenta in
H-STEER
mode and red
when there is a critical alarm.
Options menu:
Deviation bar
Selects what data is displayed by the
deviation bar.
Auto Rd/CE/XTE
– Automatically switches the deviation
bar between rudder, course error and cross track error
depending on the operating mode.
Course error
– Shows course error using the
deviation bar.
Rudder angle
– Shows rudder angle using the
deviation bar.
XTE
– Shows a cross track error bar using the deviation bar.
Header
– Menu for configuring the data header in this
display (see section 5).
1
2
3
4
5
6
7
Compass displays