![background image](http://html1.mh-extra.com/html/navman/g-pilot-3380/g-pilot-3380_operation-manual_3610280024.webp)
G-PILOT 3380 and Operation Manual
NAVMAN
25
4-2
Display > G-PILOT
Displays an advanced G-PILOT display with essential G-PILOT data.
Display area
Function
1
Data Header
Customizable data cells. Each display page has a separate header
configuration. Default: Voltage, Current, Alarm Status (see section 5).
2
Heading
Large digits show the heading of the vessel
3
Drive
indicators
Left and right boxes ‘fill up’ to indicate when the G-PILOT is driving the
rudder and how much power is being used by the drive system
4
Numerical data
panels
Customizable data cells. Default: Course to steer, Course error.
5
Bar data
panels
Customizable indicator bar. Default: Automatically switches between
Rudder angle, Course error and Cross track error.
6
Mode panel
Left hand side: shows the steering mode (COMPASS, GPS, WIND)
Right hand side: shows the operating mode (Standby, Auto, H-Steer)
inside a colored tab.
Panel changes to blue when in
AUTO
mode. The colored tab is yellow in
STBY
mode, green in
AUTO
mode, magenta in
H-STEER
mode and red
when there is a critical alarm.
Options menu:
Header
Menu for configuring the data header in this
display (see section 5).
Data setup
Enters the data set-up mode. Use the
Control Dial to highlight a data cell, press
to display a
list of data types that can be displayed in that cell.
1
2
3
4
5
6
G-PILOT displays