![background image](http://html1.mh-extra.com/html/navman/g-pilot-3380/g-pilot-3380_operation-manual_3610280019.webp)
20
NAVMAN
G-PILOT 3380 Operation Manual
3-10-3 Auto tacking or gybing in wind mode
If the set wind angle (SWA) is 90° or less, the boat tacks, if the SWA is more than 90° the boat gybes.
After the tack or gybe, the SWA is the same as the SWA before the tack or gybe, but from the
other side.
• Press
, select Tack/Gybe then press
to tack or gybe to port
• Press
, select Tack/Gybe turn then press
to tack or gybe to starboard
Example:
SWA is 40°, so the boat will tack, not gybe. If the tack angle is not set to Auto, the boat changes
direction twice:
- first by the tack angle
- second so that SWA is the same as before the tack or gybe, but on the other side:
After the boat has reached the tack angle, the boat turns again
so that the SWA (set wind angle) is the same as the SWA before
the tack, but from the other side
Wind
SWA = 40°
Press
, select
Tack/Gybe then press
to initiate a tack
to port.
The tack is finished when the boat reaches the new wind angle
To cancel the tack at any
time, press
At the end of the tack delay, the course changes by the
tack angle (in this example, the tack angle is not set to
Auto
). The boat turns.
The boat sails straight while the G-PILOT 3380 counts down
the tack delay.
The unit gives a long beep at 60 and 30 seconds to go, a
short beep every second from 10 seconds to 1 second to go
and a long beep that finishes when the countdown ends.
3 seconds to go until the tack starts