Version 29.11.2022
HW: BOT(V43)(V54)
RL4-NAC12
P
a
g
e
21
2.5.4.
After-market mirror cameras
To display the images from the left and right mirror camera, the video interface also receives
the data from the vehicle CAN bus. If, due to missing CAN bus data (as not all vehicles are
compatible), the analogue power connection was previously made, the corresponding
manual input signals
Trig-RIGHT
/
Trig-LEFT
are also required here.
For analogue connection, dont forget to set dip4 to OFF!
Power is supplied to the mirror cameras via the red cable „
ACC-out
“.
Attention: To energize the mirror camaras, only continuous current-resistant cameras may
be connected to the red line „
ACC-out
“, as they would otherwise be damaged.
Our following cameras are among others resistant to continuous current:
CAM-E-B168
CAM-E-B180
CAM-E-B113
