Version 29.11.2022
HW: BOT(V43)(V54)
RL4-NAC12
P
a
g
e
12
2.3.1.2.
High version head unit (4 X 4pin HSD)
Connect the single
waterblue
coloured female
4pin HSD connector of the 4pin HSD harness
to the
waterblue
coloured 4pin HSD connector
of the video interface.
Disconnect the vehicle harness’ female double 4pin HSD
connector at the head unit’s rearside, separate
the white 4pin HSD connector from the
black one and again connect the single
white 4pin HSD connector to the
head-unit’s same male 4pin HSD
connector, where it has been connected before.
Special case: If the two HSD connectors cannot be separated
for the reconnection of the white HSD socket, the cable
CAB-HSD-MF100 or CAB-HSD-MF026 can optionally be connected here.
Connect the female black single 4pin HSD connector to the
waterblue
coloured
male 4pin HSD connector of the 4pin HSD harness.
Connect the opposite
waterblue
coloured female 4pin HSD connector of the 4pin HSD
harness to the previously become free male 4pin HSD connector of the head-unit.
Attention: The picture’s representation of the double 4-pin HSD connector may be reversed.
Make sure that the white 4pin HSD connector is reconnected to the same position of the
head unit, where it has been connected before!
